[Execute Adjust Operation]
Overview
This system automatically adjusts the print engine when the power is turned on or before printing starts; however, image quality failures may occur during continuous printing.
Selecting some adjustment items and making continuous readjustments to solve this failures is referred to as "adjustment operation".
After selecting an adjustment item, press [OK] and [Exit [ADJUSTMENT]] to return to the [MACHINE] screen; adjustment starts automatically.
Setting Items
Screen access
Touch panel - [MACHINE] - [Adjustment] - [Execute Adjust Operation]
Setting item | Description |
|---|---|
[Gamma Automatic Adj.] | Detects the status of toner and the transfer belt using the sensor, and automatically adjusts so that the appropriate color reproduction is obtained. |
[Color Regist. Auto.Adj.] | Detects the CMYK toner overlapping condition using the sensor, and automatically adjusts so that no misalignment occurs. |
[Toner Refresh Mode] | Refreshes the toner status. This function is available when image degradation, random small dots, or small circular white blank spots occur. |
[Belt Refresh Mode] | Polishes the surface of the intermediate transfer belt. This function is available when white lines are detected at the same position in full color mode. |
[Drum Refresh Mode 1] | Refreshes the photoreceptor status. This item is available when an image blur or image flow appears on an image. |
[Drum Refresh Mode 2] | Refreshes the photoreceptor status. Execute this function when vertical streaks appear after [Charging Cleaning Mode]. |
[Textured Refresh Mode] | Available when white streaks appears in concave portions of textured paper. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.