Adjust [Four Edge Trim Mode] of Trimmer Unit TU-510.
Adjust the trim position, slit position, crease position, and perforation position.
Screen access
Touch panel - [MACHINE] - [Adjustment] - [Finisher Adjustment] - [Trimmer Unit Adjustment] - [Finishing Position Adj.] - [Four Edge Trim Mode]
Setting item | Description |
---|---|
Adjust the 2-side slit position in the paper feed direction. | |
Adjust the trim position in the crosswise direction. | |
Adjust the crease (up convex) position. | |
Adjust the crease (down convex) position. | |
Adjust the perforation position in the crosswise direction. | |
Adjust the perforation position in the feed direction. |