Adjustment | [Initial Set.]

[Initial Set.]

Initialize [Package Color Manual Adj.].

You can select adjustment items and add adjustments to make in [Package Color Manual Adj.].

Press [Initial Set.].

In [Additional Adjustment], select adjustment items to add, and press [OK].

Press each adjustment item in order from the top to adjust.

To confirm the adjustment results of each item after adjustment, press [Adj. Result].

For details on each adjustment item, refer to the following.

Setting item	Description
[Gamma Automatic Adjustment]	Adds Gamma Automatic Adjustment to an adjustment item.
[Dens.BalanceAdj.]	Adds Density Balance Adjustment to an adjustment item. For Density Balance Adjustment, the operation screen varies depending on the mounted optional devices. With a scanner: [Density Balance Auto. Adj.]
[Max Density Adj.]	Adds Maximum Density Adjustment to an adjustment item. For Maximum Density Adjustment, the operation screen varies depending on the mounted optional devices. With Intelligent Quality Care Unit IQ-501 mounted: [Max. Density Auto Adj.] With Intelligent Quality Care Unit IQ-501 unmounted: [Maximum Density Adjustment]
[Color Density Manual Control]	Adds Color Density Control to an adjustment item. When Intelligent Quality Care Unit IQ-501 or Relay Unit RU-518m is not mounted, this item is not displayed.