[Both Sides Adj. Before Job]
Overview
Automatically print a chart to perform Both Sides Adjustment before outputting a job.
When the following conditions are satisfied while [Both Sides Adj. Before Job] is set to [ON], Both Sides Adjustment is performed.
[Paper Setting] - [Before Job] of the paper tray used is set to [ON].
The paper tray used is opened/closed before a job is output.
Tips
- [Print Adjusting Paper] is changed synchronously with [Print Adjusting Paper] of [Periodical Both Sides Adj.].
Reference
- For details about [Before Job], refer to [AutoMeasure] - [Before Job].
Setting Items
Setting item | Description | |
|---|---|---|
[Both Sides Adj. Before Job] | [ON] | Automatically print a chart to perform Both Sides Adjustment before outputting a job. |
[OFF] | Does not automatically perform Both Sides Adjustment before outputting a job. | |
[Print Adjusting Paper] | [Duplex] | Outputs an adjustment chart in duplex mode. |
[Simplex] | Outputs an adjustment chart in simplex mode. For banner paper, a chart is output in simplex mode. | |
in the upper-right of a page, it turns into 
and is registered as a bookmark.