HomeDescription of Setup Buttons (Administrator Settings)

Descriptions of Setup Buttons

Description of Setup Buttons (Administrator Settings)

NetWare Print Settings[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [NetWare Settings]
          • [NetWare Print Settings]

Configure the NetWare printing environment.

SettingsDescription
[ON]/[OFF]
Select whether to enable NetWare printing.
[OFF] is specified by default.
[NetWare Print Mode]
Select an operation mode of the print server according to your environment.
[PServer] is specified by default.
[PServer]
Press [PServer] to configure settings for using this machine as PServer.
  • [Print Server Name]: Enter the print server name (using up to 63 characters).
  • [Print Server Password]: If necessary, enter a print server password (using up to 63 characters).
  • [Polling Interval]: Specify a job inquiry interval. [1] sec. is specified by default.
  • [NDS/Bindery Setting]: Select [NDS] or [NDS & Bindery]. [NDS] is specified by default.
  • [File Server Name]: Enter the priority file server name to be used in the Bindery emulation mode (using up to 47 characters).
  • [NDS Context Name]: Enter the context name of the NDS to be connected via the print server (using up to 191 characters).
  • [NDS Tree Name]: Enter the tree name of the NDS to be connected via the print server (using up to 63 characters).
[Nprinter/Rprinter]
Press [Nprinter/Rprinter] to configure settings for using this machine as Nprinter or Rprinter.
  • [Print Server Name]: Enter the print server name (using up to 63 characters).
  • [Printer Number]: Enter the printer number.
[Status]
Allows you to check the server name, queue name, or queue status.

NetWare Settings[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [NetWare Settings]

Configure the settings for using this machine in a NetWare environment.

Pressing [OK] finalizes a change of settings.

SettingsDescription
[IPX Settings]
Select whether to use IPX. When using IPX, select the Ethernet frame type according to your environment.
For details, refer to Here.
[NetWare Print Settings]
Configure the NetWare printing environment.
For details, refer to Here.
[User Authentication Setting (NDS)]
Select whether to use the NDS (Novell Directory Service) authentication.
For details, refer to Here.

Network Fax Function Settings[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [Network Fax Settings]
          • [Network Fax Function Settings]

Select whether to use IP address fax and Internet fax.

SettingsDescription
[IP Address Fax Function]
Select whether to use IP address fax.
[OFF] is specified by default.
[Internet Fax Function]
Select whether to use Internet fax.
[OFF] is specified by default.
Tips
  • To use the Internet Fax and IP Address Fax functions, ask your service representative to configure settings. For details, contact your service representative.
  • To use the IP Address Fax function, the Fax Kit is required.

Network Fax RX Error Report[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [Fax Settings]
        • [Report Settings]
          • [Network Fax RX Error Report]

Select whether to print a report if the machine has failed to receive an Internet fax or IP address fax.

[ON] is selected by default.

Network Fax Settings[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [Fax Settings]
        • [Network Fax Settings]

Change default settings on Internet Fax or IP Address Fax environment and compression type of send data.

SettingsDescription
[Black Compression Level]
Change default settings on the compression type for sending data in black and white if you are using the Internet Fax or IP Address Fax function.
For details, refer to Here.
[Color/Grayscale Multi-Value Compression Method]
Change default settings on the compression type for sending data in full color or gray scale if you are using the Internet Fax or IP Address Fax function.
For details, refer to Here.
[Internet Fax Self RX Ability]
This machine notifies its reception capability when returning a MDN message if you are using the Internet Fax function. Change the reception capability of this machine which is notified upon returning a MDN message as necessary.
For details, refer to Here.
[Internet Fax Advanced Settings]
Configure settings for fax reception confirmation (MDN/DSN) to be sent by this machine if you are using the Internet fax function.
For details, refer to Here.
[IP Address Fax Operation Settings]
Select the operation mode of this machine if you are using the IP Address Fax function.
For details, refer to Here.

Network Fax Settings[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]
        • [Network Fax Settings]

Select whether to use Internet fax and IP address fax respectively. To use IP address fax, configure the SMTP transmission environment.

SettingsDescription
[Network Fax Function Settings]
Select whether to use IP address fax and Internet fax.
For details, refer to Here.
[SMTP TX Settings]
To use IP address fax, set up the operating environment of the SMTP transmission function on this machine.
For details, refer to Here.
[SMTP RX Settings]
To use IP address fax, set up the operating environment of the SMTP receiving function on this machine.
For details, refer to Here.
Tips
  • To use the Internet Fax and IP Address Fax functions, ask your service representative to configure settings. For details, contact your service representative.
  • To use the IP Address Fax function, the Fax Kit is required.

Network Settings[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [Network Settings]

Configure the network function such as TCP/IP settings or the Scan-to-Send function operating environment.

SettingsDescription
[TCP/IP Settings]
Configure the settings for using this machine in a TCP/IP environment.
[NetWare Settings]
Configure the settings for using this machine in a NetWare environment.
[HTTP Server Settings]
Select whether to restrict the use of Web Connection, and configure the IPP operating environment.
[FTP Settings]
Configure the FTP Send environment and the FTP server function setting of this machine.
[SMB Settings]
Set up the SMB (Server Message Block) operating environment.
[LDAP Settings]
Configure the settings to search for destinations from the LDAP server or Active Directory.
[E-Mail Settings]
Configure the settings for sending and receiving E-mails using this machine.
[SNMP Settings]
Configure the settings for obtaining the machine information and monitoring the machine using SNMP (Simple Network Management Protocol).
[AppleTalk Settings]
When using the Mac operating system, set up the AppleTalk operating environment.
[Bonjour Setting]
When using the Mac operating system, set up the Bonjour operating environment.
[TCP Socket Settings]
Configure the TCP Socket operating environment.
[Network Fax Settings]
Select whether to use Internet fax and IP address fax respectively. To use IP address fax, configure the SMTP transmission environment.
[WebDAV Settings]
Configure the WebDAV Send environment and the WebDAV server function setting of this machine.
[DPWS Settings]
Configure the settings to print or scan data using the Web service (DPWS: Devices Profile for Web Services).
[Distributed Scan Settings]
Select whether to use the Distributed Scan Management on this machine.
[SSDP Settings]
Select whether to use the SSDP (Simple Service Discovery Protocol). To use SSDP, change the multicast TTL as necessary.
[Detail Settings]
Configure the detailed network settings.
[IEEE802.1x Authentication Settings]
Select whether to use IEEE802.1x authentication. To use IEEE802.1x authentication, check the authentication status and configure the certification verification items.
[Web Browser Setting]
Select whether to enable a Web Browser.
[Bluetooth Setting]
Select whether to enable Bluetooth.
[Single Sign-On Setting]
Join this machine to the Active Directory domain, and configure settings to build the single sing-on environment.
[IWS Settings]
Configure the IWS (Internal Web Server) operating environment.
[Remote Panel Settings]
Configure the settings for remote control of the Control Panel of this machine from another computer.
[Internet ISW Settings]
Download the firmware of this machine via the Internet, and configure settings to update the firmware.

Network Timeout[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [Printer Settings]
        • [Network Timeout]

When this machine is connected via a network to the computer, change the communication timeout time if necessary.

[60 sec.] is specified by default.

No. of Sets (RX)[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [Fax Settings]
        • [TX/RX Settings]
          • [No. of Sets (RX)]

If necessary, change the number of copies to print a fax.

[1] is selected by default.

Number of Redials[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [Fax Settings]
        • [Line Parameter Setting]
          • [Number of Redials]

If the machine fails to send a fax successfully, it automatically redials the same destination after the elapse of a certain period of time. If necessary, change the number of redials.

(The setting range varies according to the local standards.)

Number of RX Call Rings[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [Fax Settings]
        • [Line Parameter Setting]
          • [Number of RX Call Rings]

If necessary, change the number of times the phone rings before automatically receiving a fax.

[2 x] is specified by default.

Number of User Counters Assigned[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [User Authentication/Account Track]
        • [General Settings]
          • [Number of User Counters Assigned]

If user authentication and account track are employed, up to 1,000 users and accounts can be registered. Specify the number of counters to be assigned for users.

[500] is specified by default.