HomeDescription of Setup Buttons (User Settings)

Descriptions of Setup Buttons

Description of Setup Buttons (User Settings)

Register Authentication Information[Utility]

To display:
  • [Utility]
    • [User Settings]
      • [Register Authentication Information]

Register or delete the biometric authentication information or IC card authentication information of the user who is logged in through user authentication.

Tap [Edit], then register authentication information. To delete authentication information, tap [Delete].

Tips
  • You can specify this option when you install the Authentication Unit and you are allowed to change the setting by the administrator.

Relay User Box[Utility]

To display:
  • [Utility]
    • [One-Touch/User Box Registration]
      • [Create User Box]
        • [Relay User Box]
          • [New]

Register a User Box to relay fax.

SettingsDescription
[User Box No.]
Registration number of the User Box. [User Box No.] is automatically registered from a lower number that is not used. When specifying a number, tap [User Box No.], and enter the value between 1 and 999999999.
[User Box Name]
Enter the User Box name that appears on the Touch Panel (using up to 20 characters).
Assign a name that helps you easily identify the User Box.
[Relay Destination]
Selects a group that has fax destinations.
When registering a group destination as a relay destination, be sure to set the fax address in the group destination in advance.
[Relay TX Password]
To use a password to restrict usage of the User Box using password, enter the password (using up to eight characters).
The entered password is required when sending a relay request to this machine. Inform the sender who want to use this machine as a relay machine of the password you entered here.
Tips
  • To change the Relay User Box settings you have registered, select the User Box name and tap [Edit].
  • To delete an existing Relay User Box, select the User Box name and tap [Delete].

Remote Panel Operation[Utility]

To display:
  • [Utility]
    • [Remote Panel Operation]

Press this button to start remote operation of the Control Panel of this machine.

Tips
  • This button is displayed when the operating environments of remote panel are configured by administrator.