HomeDescription of Setup Buttons (Administrator Settings)

Descriptions of Setup Buttons

Description of Setup Buttons (Administrator Settings)

1st Tri-Fold Position Adjustment[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [1st Tri-Fold Position Adjustment]

If the tri-fold positions are not located evenly, use this option to adjust the first fold position.

Copy after configuration, then repeat adjustments as required.

SettingsDescription
[Paper Size]
Select the size of paper that is used to adjust the fold position.
[Adjust Value]
Enter an adjustment value between -10.0 mm and 10.0 mm by tapping [-] and [+].
  • [-]: Move the fold position to the left.
  • [+]: Move the fold position to the right.
[0.0 mm] is specified by default.
Tips
  • This item is available when the Finisher FS-534 and Saddle Stitcher SD-511 are installed.
  • This item is available when the Finisher FS-535 and Saddle Stitcher SD-512 are installed (bizhub C554 only).
  • Make adjustment while checking paper folded at a displaced position.
  • The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.

1st Z-Fold Position Adjustment[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [1st Z-Fold Position Adjustment]

Use this option to adjust the 1st Z-fold position.

Copy after configuration, then repeat adjustments as required.

SettingsDescription
[Paper Size]
Select the size of paper that is used to adjust the fold position.
[Adjust Value]
Enter an adjustment value between -12.8 mm and 12.7 mm by tapping [-] and [+].
  • [-]: Move the punch position to the right.
  • [+]: Move the punch position to the left.
[0.0 mm] is specified by default.
Tips
  • This adjustment is possible when the Finisher FS-535 and Z Folding Unit ZU-606 are installed in bizhub C554.
  • Make adjustment while checking paper folded at a displaced position.
  • The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.

2nd Tri-Fold Position Adjustment[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [2nd Tri-Fold Position Adjustment]

If the tri-fold positions are not located evenly, use this option to adjust the second fold position.

Copy after configuration, then repeat adjustments as required.

SettingsDescription
[Paper Size]
Select the size of paper that is used to adjust the fold position.
[Adjust Value]
Enter an adjustment value between -10.0 mm and 10.0 mm by tapping [-] and [+].
  • [-]: Move the fold position to the left.
  • [+]: Move the fold position to the right.
[0.0 mm] is specified by default.
Tips
  • This item is available when the Finisher FS-534 and Saddle Stitcher SD-511 are installed.
  • This item is available when the Finisher FS-535 and Saddle Stitcher SD-512 are installed (bizhub C554 only).
  • Make adjustment while checking paper folded at a displaced position.
  • The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.

2nd Z-Fold Position Adjustment[Utility]

To display:
  • [Utility]
    • [Administrator Settings]
      • [System Settings]
        • [Expert Adjustment]
          • [Finisher Adjustment]
            • [2nd Z-Fold Position Adjustment]

Use this option to adjust the 2nd Z-fold position.

Copy after configuration, then repeat adjustments as required.

SettingsDescription
[Paper Size]
Select the size of paper that is used to adjust the fold position.
[Adjust Value]
Enter an adjustment value between -12.8 mm and 12.7 mm by tapping [-] and [+].
  • [-]: Move the punch position to the right.
  • [+]: Move the punch position to the left.
[0.0 mm] is specified by default.
Tips
  • This adjustment is possible when the Finisher FS-535 and Z Folding Unit ZU-606 are installed in bizhub C554.
  • Make adjustment while checking paper folded at a displaced position.
  • The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.
  • The distance between the left end of the paper and the second Z-fold position must be 1/16 inch (2 mm) or more.