FTP Server Setting

Click FTP Setting - FTP Server Setting on the menu of Network tab to display this screen.

This screen allows you to make settings for using the FTP server function.

  1. To use the FTP server of the machine, select ON from the FTP Server drop-down list.

  2. If necessary, specify commands that are sent from FTP clients to the machine and you want to reject reception in Deny Reception Command.

  3. To enable security of the machine against FTP bounce attacks, select Enable from the PORT Command Enhanced Security drop-down list. However, it cannot be enabled if PORT/EPRT is selected from Deny Reception Command.

  4. Click OK. Clicking Cancel cancels the setting.

  5. Click OK on the setting complete screen.