TCP/IP Setting
Click TCP/IP Setting - TCP/IP Setting on the menu of Network tab to display this screen.
This screen allows you to configure settings to connect to a TCP/IP environment and use it.
To use TCP/IP, select ON from the TCP/IP drop-down list.
Specify Network Speed as necessary. The default setting is Auto (10M/100M/1Gbps).
To assign an IPv4 IP address, specify the IP address assignment method from IP Address Setting Method in IPv4.
If you have selected Manual Setting for IP Address Setting Method, enter IP Address, Subnet Mask, and Default Gateway.
If you have selected Auto Setting for IP Address Setting Method, the IP address is automatically assigned by DHCP or another method. Also select the Auto Input method.
To use IPv6, select ON from the IPv6 drop-down list.
To assign an IPv6 global address, select ON from the Auto IPv6 Setting drop-down list.
To assign an IPv6 global address using DHCPv6, select ON from the DHCPv6 Setting dropdown list.
If you have selected OFF for Auto IPv6 Setting, enter Global Address, Prefix Length, and Gateway Address.
Change port numbers from RAW Port Number if necessary. If there is any port number that is not used, clear the checkbox of the port number.
If a DNS server is used in the TCP/IP environment, and you want to use the host name to connect the machine to the environment, enter DNS Host Name.
To enable the dynamic DNS function, select Enable from Dynamic DNS Setting. Similarly, to use Link-Local Multicast Name Resolution (LLMNR), select Enable from the LLMNR Setting drop-down list.
To obtain a domain name automatically in an environment where DHCP or another similar method is used, select Enable from DNS Domain Auto Obtain. Likewise, to obtain a search domain name automatically, select Enable from the DNS Search Domain Name Auto Retrieval drop-down list.
If you do not want to obtain the domain name automatically, enter DNS Default Domain Name.
If you do not want to obtain the search domain name automatically, enter DNS Search Domain. Up to 251 one-byte characters can be used.
If you want to use host names for name resolution when accessing computers and servers on the network from the machine, configure DNS Server Setting (IPv4) and DNS Server Setting (IPv6) for IPv4 and IPv6 respectively.
To obtain the address of the DNS server automatically, select Enable from the DNS Server Auto Obtain drop-down list, and enter the address of the DNS server used.
To enable Service Location Protocol (SLP), select Enable from the SLP Setting drop-down list.
To enable Line Printer Daemon (LPD), select Enable from the LPD Setting drop-down list. To use LPR printing, it must be set to Enable.
Click OK on the setting complete screen.
If you have changed any setting with an asterisk (*), turn the machine power off then on.
If you have changed the IP address or IP Address Setting Method, the following screen is displayed.
Access the new IP address.