Using with an IPP Connection
Preparation required to use this function (for the administrator)
Set up the IPP operating environment.
For details on the setting procedure, refer to Configuring the IPP Printing Environment.
Adding a printer
Use the following procedure to add a printer via the IPP connection.
1
Select [System Settings] (or [System Preferences]) in the Apple menu.
2
Click [Network].
3
The Ethernet setting window appears.
Select [Ethernet], then click [Advanced].
4
Click the [TCP/IP] tab.
5
Configure the settings including the IP address and subnet mask according to the settings of the network to which the computer is connected.
6
Click [OK].
For macOS 10.14/10.15/11/12, click [Apply], then click the close button at the top left corner of the window.
Then, add the printer to the computer.
7
Select [System Settings] (or [System Preferences]) in the Apple menu.
8
Click [Printers & Scanners].
9
Click [Add Printer, Scanner, or Fax] (or [+]).
If the pull-down button is displayed after you clicked [+], select [Add Printer or Scanner].
10
Click [IP].
11
In [Protocol], select [Internet printing Protocol-IPP].
12
In [Address], enter the IP address for the machine. In [Queue], enter "ipp".
13
Check that the printer driver corresponding to this machine specified with the IP address is displayed in [Use].
When the printer driver is displayed, proceed to step 15.
When the printer driver is not correctly displayed, proceed to step 14.
14
Manually select the printer driver.
Select [Select Software] from [Use], then click the driver of the desired printer from the list that is displayed in another window.
15
Click [Add].
This completes the addition process of the printer. Then, proceed to the [Options] screen of the printer driver to configure the optional environment for this machine. For details, refer to Configuring the optional environment of this machine.
in the upper-right of a page, it turns into 
and is registered as a bookmark.