In [Layout / Finish], you can configure settings about the layout or finish of printing. You can combine pages or adjust print positions.
From the setting window, you can switch between the [Layout] window and the [Finish] window.
Setting | Description |
---|---|
[Print Type] | Select the print sides of paper.
|
[Binding Position] | Select the binding position for 2-sided printing. |
[Poster Mode] | The original image is enlarged, divided, and printed on multiple sheets. For example, when you select [2 e 2], one page of the original is divided and printed onto four sheets. When you join the printed sheets together, a large poster is created. To create overlap margins, select the [Overlap width line] check box. Printing originals containing pages of different sizes or orientations in one job may cause images to be partially lost or overlapped. |
[Rotate 180] | Select this check box to rotate the original 180 degrees and print it. |
[Image Shift] | Select this check box to fine tune (shift) the print position of the image with respect to the paper. Selecting the [Image Shift] check box displays the [Image Shift] window. Specify the print position in detail.
|
[Chapters] | When you have selected [2-Sided] or [Booklet] in [Print Type], select this check box if you want to print particular pages on the front side. In [Page Number] in the [Chapters] window that appears when this check box is selected, specify the page numbers of the pages you want to print on the front side. To specify multiple page numbers, separate each number with a comma (for example, "2,4,6") or connect the numbers using a hyphen (for example, "6-10"). |
[Staple] | Select this check box to staple the printed sheets. In addition, specify the staple position. |
[Punch] | Select this check box to make punch holes (binder holes) in the printed sheets. In addition, specify the number and positions of punch holes. |
[Fold & Staple] | When folding the printed sheets, select the folding mode. |
[Page Fold Setting] | When you have selected [Half-Fold(By Sheet)] or [Tri-Fold(By Sheet)] in [Fold & Staple], specify the number of pages to be folded at one time. |
[Paper Arrangement] | Select whether to adjust the binding position on two-sided printed sheets collectively after all data items are received or sequentially each time a data item is received.
|