Checking Automatic Inspection Reports Using the Browser

Access Web Utilities on Auto Inspection Unit UK-301 using the browser to check the automatic inspection report.

NOTICE

• [Create Auto Inspection Report] must be set to [ON] ahead of time when performing an automatic inspection in order to create [AutoInspect.Report].
• [Auto Inspection NIC Setting] must be configured to display [AutoInspect.Report].

Reference

• For details about [Create Auto Inspection Report], refer to Configuring Advanced Automatic Inspection Settings in Advance.
• For details about [Auto Inspection NIC Setting], refer to Configuring NIC Settings for Automatic Inspections.

This section describes the workflow for checking automatic inspection report from Web Utilities.

1

Launch your browser.

• For details about the operating environment of the Web Utilities browser, refer to Web Utilities.

2

Enter "http://<IP address of Auto Inspection Unit UK-301>/" in the address bar and press [Enter] to display the Web Utilities top screen of Auto Inspection Unit UK-301.

• For example, if the IP address of Auto Inspection Unit UK-301 is 192.168.1.20, enter "http://192.168.1.20/".

NOTICE

• The IP address of Auto Inspection Unit UK-301 must be set first using [Auto Inspection NIC Setting].

3

Click [List of Auto Image Inspection Report] to display the login screen.

4

Enter the [User Name] and [Password], and log in.

• For details, refer to Login.

5

In [List of Report], click [Report] for the job you want to check the inspection results of.

• For details, refer to [List of Auto Image Inspection Report].

6

You can check the reports for [Completed Job] (printed items that complied with inspection levels), [Out of range] (printed items that did not comply with inspection levels), and [Decording result] (serial number / barcode decoding results).

• For details, refer to [List of Auto Image Inspection Report].

Tips

• You can check the automatic inspection report in PDF. For details, refer to Checking the Automatic Inspection Report in PDF.

Reference

• For details about how to check automatic inspection reports using the system’s Touch panel, refer to Checking Automatic Inspection Reports Using the Touch panel.