[RU Curl Adjustment]

On the [RU Curl Adjustment] screen, correct the output paper curling for each feed tray.

This function straightens curled paper to prevent paper jams or paper deviation in post-processing.

Even if different types of paper are loaded according to each feed tray, the function can make corrections according to the characteristics of each paper type, giving an extra degree of convenience.

The 2 correction methods detailed below can be selected according to the work conditions.

Mechanical type: A method that reduces curling by passing the paper through the curve path for curl correction. Select 1 of 21 levels of curl correction strength.

Humidification type: A method that reduces curling by humidifying the paper and then adjusting the level of moisture in the paper.

Reference

• For details about [RU Curl Adjustment], refer to [RU Curl Adjustment].

1

Press [RU Curl Adjustment] on the [MACHINE] screen.

2

Select the paper tray to adjust.

• If the paper weight is the same, press [All Trays] or [MultipleSel.] to select multiple paper feed trays at the same time.

3

Set the correction direction and strength for mechanical curl adjustment.

• For details about the setting, refer to [RU Curl Adj.].

4

Configure the humidification type curl adjustment settings.

• For details about the setting, refer to [RU Curl Adj.].

5

Press [OK].

This returns you to the [MACHINE] screen and completes the settings process.