Configuring NIC Settings for Automatic Inspections
If you configure items using [Auto Inspection NIC Setting], you can check the automatic inspection report from the Web Utilities on Auto Inspection Unit UK-301. This is set by default when installed.
You can check or change settings by accessing, in order, Control panel, Utility/Counter, [Administrator Setting], [Network Setting], and then [Auto Inspection NIC Setting].
[Auto Inspection NIC Setting] is displayed and can be configured when Auto Inspection Unit UK-301 is mounted.
Set the following items.
[IP Address]
[Subnet Mask]
[Gateway Address]
[Line Speed Setting]
For details, refer to [Auto Inspection NIC Setting].
in the upper-right of a page, it turns into 
and is registered as a bookmark.