Checking Automatic Inspection Reports Using the Touch panel
Overview
When checking the results of automatic inspections, refer to [AutoInspect.Report]. Perform actions such as reprinting the document as necessary.
This section describes the procedure for checking automatic inspection reports from the system's Touch panel.
NOTICE
- [Create Auto Inspection Report] must be set to [ON] ahead of time when performing an automatic inspection in order to create [AutoInspect.Report].
- [Auto Inspection NIC Setting] must be configured to display [AutoInspect.Report].
Reference
- For details about [Create Auto Inspection Report], refer to Configuring Advanced Automatic Inspection Settings in Advance.
- For details about [Auto Inspection NIC Setting], refer to Configuring NIC Settings for Automatic Inspections.
Check Procedure
This section describes the workflow for checking automatic inspection reports from the system's Touch panel.
1
Press [MACHINE] and then [AutoInspect.Report] on the system’s Touch panel to display the login screen.
2
Enter the [User Name] and [Password], and log in.
For details, refer to Login.
3
In [List of Report], press [Report] for the job you want to check the inspection results of.
For details, refer to [List of Auto Image Inspection Report].
4
Check the report for [Out of range] (printed items that did not comply with inspection levels).
For details, refer to [List of Auto Image Inspection Report].
To check the reports for [Completed Job] (printed items that complied with inspection levels) and [Decording result] (serial number / barcode decoding results), you will have to use the browser.
Reference
- For details about how to check automatic inspection reports from the browser, refer to Checking Automatic Inspection Reports Using the Browser.
in the upper-right of a page, it turns into 
and is registered as a bookmark.