Allows you to print the original onto both sides of the paper, and then staple the document.
This section introduces the 2 settings procedures detailed below.
1. Print onto paper that is the same size as the original size
2. Reduce the size of the paper same as original, perform a 2 in 1 imposition, and print
The following is recommended
Use staple printing in such circumstances.
When you want to print the original with a booklet-like finish
When you want to bundle together a high number of documents
Target Jobs
Does not depend on the file format.
Target Tools
Touch panel (machine store jobs) | Printer Driver | AccurioPro Print Manager | Machine Hot Folder | AccurioPro Hot Folder |
---|---|---|---|---|
- | . | . | . | . |
Assumed Operating Environment
Item Name | Contents |
---|---|
OS | Windows 10 |
Application | Adobe Acrobat Reader DC |
Printer Driver | PS Plug-in Driver |
Option | Finisher For details about the Finisher, refer to the "Name and Specifications of Each Component in Paper Output Options" of [Specifications]. |
This section describes the procedure for performing 2-sided printing of a 1-sided A4-sized original and stapling it using the PS Plug-in Driver.
Open the original in the application, and click [Print] in the [File] menu.
Select the printer to use for printing, and click [Properties].
Select the [Layout] tab, and configure the items.
For details about the settings, refer to the [Layout] tab settings (described after the procedure).
Select the [Finishing] tab, and configure the items.
For details about the settings, refer to the [Finishing] tab settings (described after the procedure).
Select the [Paper] tab, and click [Acquire Tray and Paper Data].
"" is displayed if tray / paper information is successfully obtained.
"" is displayed if you were unable to acquire tray / paper information. Check to see if parts such as the optional paper feed tray are mounted properly.
For [Paper Tray], select a paper feed tray in which A4 paper (long edge) has been loaded, and click [OK].
Enter the [Copies] you want to print on the [Print] screen.
Click [Print].
[Layout] tab settings
Item | Setting Value |
---|---|
[2-Sided] | Add check mark |
[Binding Position] | [Left Bind] |
[Original Size] | [A4] |
[Original Orientation] | [Portrait] |
[Finishing] tab settings
Item | Setting Value |
---|---|
[Staple] | Select any of the following
|
This section describes the procedure for reducing 1-sided A4-sized originals (PDF) to A4 size paper, performing 2-sided imposition, performing 2-sided printing and stapling it using the PS Plug-in Driver.
Open the original in the application, and click [Print] in the [File] menu.
Select the printer to use for printing, and click [Properties].
Select the [Layout] tab, and configure the items.
For details about the settings, refer to the [Layout] tab settings (described after the procedure).
Select the [Finishing] tab, and configure the items.
For details about the settings, refer to the [Finishing] tab settings (described after the procedure).
Select the [Paper] tab, and click [Acquire Tray and Paper Data].
"" is displayed if tray / paper information is successfully obtained.
"" is displayed if you were unable to acquire tray / paper information. Check to see if parts such as the optional paper feed tray are mounted properly.
For [Paper Tray], select a paper feed tray in which A4 paper (long edge) has been loaded, and click [OK].
Enter the [Copies] you want to print on the [Print] screen.
Click [Print].
[Layout] tab settings
Item | Setting Value |
---|---|
[2-Sided] | Add check mark |
[Imposition] | [2 in 1 (Full Size)] |
[Binding Position] | [Top Bind] |
[Original Size] | [A4] |
[Original Orientation] | [Portrait] |
[Paper Size] | [A4] |
[Fit to Paper Size] | Add check mark |
[Finishing] tab settings
Item | Setting Value |
---|---|
[Staple] | Select any of the following
|