You can edit print settings of a hold job using Job Centro.
Start Job Centro and log in to the machine. For details about how to start Job Centro, refer to Start Job Centro.
The Job Centro screen is displayed.
Click the Hold Job tab and select the job (one job only) to edit.
supplementary explanationIn Job Centro, you can only edit print jobs (Job Type is Print). To edit a copy job or scan job (Job Type is Copy), use the touch panel of the main body.
Click Job Edit.
supplementary explanationIf Color Centro is installed on your computer, you can click Tone Curve to adjust tone curve. For details, refer to Tone Curve Adjustment Flow.
The specified job is called and the Job Edit (print setting) screen is displayed.
Click the tab of the item to edit and change the setting.
The Job Edit (print setting) screen of Job Centro allows you to make the following settings.
For more details of each item, refer also to the following.
supplementary explanationOverview of the [Job Edit]
supplementary explanationPS Plug-in Driver
Tabs | Check Job |
---|---|
Basic | Original size, original orientation, paper tray, paper profile, paper information, number of copies, page range |
Layout | 2-sided, imposition, binding position, imposition quality, page interval, creep adjustment, booklet cover blank page insertion, booklet splitting, book spread, poster printing, original size, original orientation, paper size, zoom, full bleed, 180° rotate |
Finishing | Binding position, staple, divided output, punch, fold, ring binding (varies depending on the connected options) , Output tray, feed direction, sort/group, output order, offset output copies, offset output sheets, needless tab ejection |
Paper | Acquire tray and paper data, tray settings, paper profile |
Cover | Banner tray, front cover (PI front cover tray and front cover tray), back cover (back cover tray and PI back cover tray) |
Perfect Binding | Mode, cover trim, cover 2-sided, cover tray, cover size, paper profile |
Page Settings | Page Settings, Chapters , Tab Settings |
Color Mode | Output color / 2-color printing, separation output / color bar / color verification |
Management | Color management data acquisition, color configuration, manual settings |
Quality | Color Validation and Real-time Adjustment |
Imaging | Resolution, screening, outline process, use CIE color, 1 dot line emphasis, glossy |
Image Position | Image shift, tab image shift, image position |
Marks (Crop Marks) | Crop Mark, Setting for Imposition, Only for Front Side, Corner Crop Mark Type, Trim Margin, Horizontal Shift, Vertical Shift , trim line, use PDF trim box, trim line size, trim margin, color, line width |
Stamp | Date/time, page number, numbering |
Authent. | User authentication (user authentication, public user, user name, and pass-word), account track (account track setting, account name, and password) |
supplementary explanationIf images with different job type (Copy/Print) or the controller image compression setting (Gradation priority/Resolution priority) are imposed and saved in the Image Page Edit screen on the touch panel of the main body, you cannot select Booklet, Adhesive Binding or Combine of Application Setting cannot be selected in the Job Ticket Edit screen.
After editing, click Save.
The Job Edit (print setting) screen closes and the edited content is saved. After saving, Edited is displayed in Status of the job displayed on the Hold Job screen of Job Centro.
supplementary explanationThe operations in Job Centro differ from the touch panel of the main body and you do not have the option to newly save or overwrite. To newly save as another job, copy an original job in the Hold Job screen of Job Centro before editing.