Schedule Screen

The job bar display shows the relation between the paper tray to be used in a job and the following.

  • Number of sheets to be used in the job

  • Estimated time to start and complete the job

  • Time required for the job (minute)

Tips
  • The Schedule function can be used when Image Controller IC-604 is mounted.

No.

Name

Description

1

JOB LIST

Press to proceed to the Schedule screen or display the JOB LIST screen. The Schedule screen is displayed when Schedule is pressed on the JOB LIST screen.

2

Paper tray items

Displays loaded paper size, remaining amount, and paper weight and type specified for the tray in Paper Setting.

3

Unit of operation line

Indicates the number of sheets to be used, required time (minutes), or estimated time for reserved jobs.

4

Job bar display

Displays the reserved job with blue, yellow or orange bar according to the rules below:

- Blue: Available for output with plenty of paper.

- Yellow: Short supply of paper.

- Orange: Highly likely to stop due to lack of paper, no appropriate paper loaded, or unavailable for output due to a different paper setting specified.

When using multiple trays for one job, multiple bars are displayed. The background of each job is displayed in gray shading so you can determine the end of each job.

5

Paper Setting

Changes the paper settings specified on this machine.

6

Change Unit

Pressed to switch the three units of operation-line (Sheet Volume, Timetable, Time Frame (m)).

7

-/+

Pressed to change the scale of the job bar display.

8

Hold Job

Holds the selected job.

9

Delete Job

Pressed to delete the selected job.

10

Paper setting dialog

Displayed when a bar in the job bar display is pressed. It provides the paper setting and detailed paper setting of the selected job.

11

Change Tray Paper

Press to change the tray selection of the reserved job, or to change the paper setting of the selected tray.

12

Confirm Details

It provides information of paper setting of the selected job bar.

13

Operation dialog

Appears when a bar in the job bar display is pressed. The dialog provides Job Reselect, Tray Select, and Order Change to make each operation for the job.

14

Job Reselect

Switches the paper setting dialog between jobs when multiple job bars are displayed.

15

Tray Select

Switches the paper setting dialog from one tray to another, if the selected job uses more than one tray.

16

Order Change

Changes the output order of reserved jobs.

17

No Appropriate Paper

Displays a job bar when no appropriate tray is found for a copy job specified as Auto Paper or for a print job with Auto Select specified for Paper Tray in the Printing Preferences window, or when the corresponding tray runs out of paper.

The Schedule screen is reloaded when the machine goes into the following conditions.

  • When a paper tray is loaded, pulled out, or changed in paper amount

  • When the paper setting has been changed

  • When a job operation has started or restarted

  • When a reserved job is added, changed in output order, or deleted

  • When an output job is completed

  • When the screen update interval of 30 seconds or more occurs while printing

  • preconditionThe job bar for the current output job indicates the remaining amount of that job, becoming shorter over time.

  • preconditionThe job bar will be shown in the job bar display after scanning the original or transferring images from the image controller is completed.

  • preconditionThe required time shorter than a minute will be indicated as a minute.