[NoImageAreaErase]
Overview
When a thick original such as a book is scanned using the Original glass, black copy marks may be produced along the borders of the original.
Setting [NoImageAreaErase] detects the size of the original placed on the Original glass, and then erases and scans the area outside the borders of the original.
Original positioning | Output | |
|---|---|---|
 | Normal mode  | [NoImageAreaErase]  |
Load the original on the Original glass. Be sure to keep the ADF open.
The original size requires 30 mm e 30 mm / 1.18" e 1.18" or more.
NOTICE
- If the lighting in the room is directly over the original glass, [NoImageAreaErase] may not function correctly. In this case, consult your service representative about the machine installation location.
Tips
- You can set operation conditions to enable [NoImageAreaErase]. For details, refer to [Copy Setting].
- To make [NoImageAreaErase] function according to the working environment, you can set the density level of the original and the erasing method. For details, refer to [Erase Operation Setting].
Tips
When [NoImageAreaErase] is set, the following functions are not available.
- [Combine]
- [Booklet]
- [Adhesive Binding]
Setting Items
Setting item | Description |
|---|---|
[NoImageAreaErase] | Enables [NoImageAreaErase]. To disable the function, press this key again. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.