Offset Sort is a function that outputs (offset output) the specified number of sets of prints in the same page order as the original while dividing them by each set.
Sets are divided by shifting the position every specified number of sets, or inserting partition paper when printing.
Difference between Offset Sort and Sort
Original | [Offset Sort] | [Sort] |
Example: Output the 4-page original by 3 sets. |
The output tray and offset method vary depending on the optional devices mounted on this system as shown below.
Mounted optional device | Output tray | Offset method | Available number of copies |
---|---|---|---|
Output Tray OT-512 | Main tray | The specified number of sets of copies arranged in the same page order as the original are offset-output by 15 mm ^ 3 mm / 0.60" ^ 0.12" for each set. | The number of offset-output sets can be specified in the range from 1 set to 9,999 sets. |
Large Capacity Stacker LS-507 | Stacker tray | The specified number of sets of copies arranged in the same page order as the original are offset-output by 20 mm / 0.79" in the conveyance direction for each set on the stacker tray. | |
Finisher FS-541 | Main tray | The specified number of sets of copies arranged in the same page order as the original are offset-output by 15 mm ^ 3 mm / 0.60" ^ 0.12" for each set. |
Use the on-screen keypad to enter the numeric value.