Set the vertical direction of the original to load on the ADF or Original glass.
When the set direction is different from the preset orientation, the scanning range and copy may produce an unintended result.
To use a function such as 2-sided original, 2-sided copy, Combine, Booklet, or Staple, set the vertical direction of the original to load into the ADF or Original glass. Otherwise, you may not be able to make the desired copy.
Setting item | Description | |
---|---|---|
[Normal] | Select this item when the original is loaded with the top (upper side) on the far side. | |
[Left] | Select this item when the original is loaded with the top (upper side ) on the left side of the ADF or Original glass. | |
[Upside-Down] | Select this item when the original is loaded with the top (upper side) on the near side. | |
[Right] | Select this item when the original is loaded with the top (upper side) on the right side of the ADF or Original glass. |