[Face/Order]
Overview
Set the face and order to output to the output tray.
Setting to [Face Up] outputs a job to the output tray with the front face up, so you can immediately check the output result.
Tips
- To arrange pages in reverse order, set the output face to [Face Up] and the output order to [1 to N], to stack the pages in page order.
- Setting the output order to [N to 1] automatically sets the output face to [Face Up].
- For 2-sided copy, set the output face based on the front face.
- The front face is automatically set depending on the function selected in [Output], so it cannot be changed in some cases.
- When Trimmer Unit TU-510 is mounted, a job may not be output with the specified output face depending on conditions. For details, refer to "Precautions on Output Face" in Trimmer Unit TU-510.
Setting Items
Setting item | Description | |
|---|---|---|
Face | [Face Up] | Outputs a job with the front face up. |
[Face Down] | Outputs a job with the front face down. | |
Order | [1 to N] | Outputs prints in page order. |
[N to 1] | Outputs prints in the reverse order of the page order. | |
in the upper-right of a page, it turns into 
and is registered as a bookmark.