[COPY] Screen
Overview
Set copy conditions.
Tips
- Up to 4 shortcut keys for frequently used functions can be displayed under [Quality Adj.], [Application], or [Output Setting]. For details, refer to [Shortcut Key Register].
Setting Items
Screen access
Touch panel - [COPY]
Setting item | Description |
|---|---|
Sets conditions for the original. Some settings are displayed with an icon just under the key. | |
[Separate Scan] | Divides scanning of the original into multiple scans. The scanned image information is temporarily stored in memory and collectively printed at the end. |
Sets the orientation of the original. | |
Sets image quality conditions. The [Copy Density] setting is displayed just under the key. | |
Set the zoom ratio when making a copy. The zoom ratio is displayed with a numeric value just under the key. The zoom ratio can also be set using keys that are displayed under the numeric value. | |
Select the combination of 1-sided and 2-sided modes for the original and copy. The setting is displayed by an icon on the key. | |
Sets application functions. Up to 6 setting items are displayed just under the key. | |
Sets the output location and post-processing functions. The setting is displayed by an icon just under the key. | |
Sets the color mode. | |
Configures the setting to store the copied original as data in this system. | |
Select a paper tray to use for making copies. |
Basic Copy Operation
1
Position the original.
Load the original on the ADF or Original glass.
2
Press [COPY].
3
Set the copy conditions.
[Original Setting]: Sets conditions for the original. Configure settings for the original such as the orientation, image quality, and 2-sided original.
[Quality Adj.]: Sets image quality conditions. Set the scanning density, tone, brightness, contrast, etc.
[Zoom]: Sets the copy zoom ratio.
[Simplex/Duplex]: Select the combination of 1-sided and 2-sided modes for the original and copy.
[Application]: Sets application functions. Configure various settings such as erasing the outside of an original or adding a stamp.
[Output Setting]: Sets the output location and post-processing functions. Set finishing such as punching or folding.
[Color]: Sets the color mode.
[Store Setting]: Configures the setting to store the copied original as data in this system.
[Paper]: Select a paper tray to use for copying.
4
Enter the number of sets using the Keypad of the Control panel.
5
Press Start on the Control panel.
in the upper-right of a page, it turns into 
and is registered as a bookmark.