[Cover Print]
Overview
Set cover printing.
NOTICE
The following setting is required to use this function.
- In [Cover Tray], select the desired paper tray from [Paper Tray].
Tips
- When the desired paper tray is selected from [PI Tray] or [PB Tray] in [Cover Tray], this setting is not available.
- When Saddle Stitcher SD-513 with Creaser Unit CR-101 mounted is mounted on the system, only the cover can be creased.
- Select whether the cover will be printed or blank, and printed 1-sided or 2-sided. Covers can also be trimmed to fit the thickness of the body.
Setting Items
Setting item | Description |
|---|---|
[ON] | Prints the cover. |
[OFF] | Does not print the cover. |
in the upper-right of a page, it turns into 
and is registered as a bookmark.