Configure the setting to trim the fore edge of Fold & Staple paper.
NOTICE
The folded and stapled sheets are output to the Bundle exit tray. Set the Extension tray of the bundle exit tray as preparation, and open the Stopper. Otherwise, the output paper may drop down from the Bundle exit tray. Also, the full-load detection function may not work.
When using thin paper that curls easily for Fold & Staple, output prints so that paper is curled toward the inside. Before outputting a booklet, print out just a few sheets to the Secondary (sub) tray, and check the direction of the curl. If the printed-out sheets are curled upward, the paper is curled inward when a booklet is created.
Setting Items
Setting item
Description
[ON]
Trims the fore edge.
[OFF]
Does not trim the fore-edge.
Bookmarks
If you click or tap in the upper-right of a page, it turns into and is registered as a bookmark.
Filter by title
Filter by title
You can narrow the search range from the menu for this user's guide. Multiple choices are possible.