Using the WebDAV Server Function
Setting flow
To use the application that establishes a communication via the WebDAV server of this machine, set the WebDAV server function of this machine.
If a certificate for this machine is registered, you can encrypt communication between the machine and application using SSL.
To use the WebDAV server of this machine for the association, follow the below procedure to configure the settings.
3
Configuring settings to suit your environment
Configuring the WebDAV server settings
Configure settings to enable use of the WebDAV server function of this machine.
Select [Network] - [WebDAV Settings] - [WebDAV Server Settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
Setting | Description |
|---|---|
[WebDAV Settings] | When using the WebDAV server function of this machine, set this option to ON (default: ON). |
[Access Rights Settings] | Specify the password to restrict access to the WebDAV server of this machine (using up to 64 single-byte characters) (default: [sysadm]).
|
Using SSL communication
Encrypt communication between this machine and the WebDAV client with SSL.
1
Register a certificate for this machine and enable SSL communication.
For details, refer to Using an SSL/TLS Communication.
2
Select [Network] - [WebDAV Settings] - [WebDAV Server Settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
[SSL Setting]: Select whether to use the SSL for communication or not (default: [Non-SSL Only]).
in the upper-right of a page, it turns into 
and is registered as a bookmark.