When quick authentication is allowed while user authentication is enabled, you can print with authentication by user name only (without a password) when making prints using the printer driver.
When using the quick authentication, follow the below procedure to configure the settings.
Specify whether to allow quick authentication.
Select [User Auth/Account Track] - [Simple Authentication setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and set [Simple Authentication setting] to ON (default: OFF).
You must inquire the LDAP server about the user name to obtain permission to access this machine in an environment where external server authentication is employed. This LDAP server is called the quick authentication server.
For details on settings, refer to the [Register Simple Authentication Server (1st Server)] settings (described after this procedure).
For details on settings, refer to the [Register Simple Authentication Server (2nd Server)] settings (described after this procedure).
Settings of [Register Simple Authentication Server (1st Server)]
Setting | Description |
---|---|
[Simple Authentication Server Name] | Enter the name of the authentication server (using up to 32 single-byte characters). |
[External Authentication Server] | Select the external authentication server used to associate the quick authentication (default: [No Selection]). When authentication succeeds, user authentication information is registered on the machine to manage users on the machine. This authentication information includes the user name and external authentication server name. The external authentication server name selected here is registered on the machine together with the user name. |
[Server Address] | Enter the LDAP server address. Use one of the following formats.
|
[Port No.] | If necessary, change the LDAP server port number (default: [389]). |
[Timeout] | If necessary, change the time-out time to limit a communication with the LDAP server (default: [60] sec.). |
[Search Base 1] to [Search Base 3] | Specify the starting point and range to search for a user to be authenticated.
|
[Authentication Method] | Select the authentication method to log in to the LDAP server depending on your environment (default: [Simple]).
|
[Use Referral] | Select whether to use the referral function (default: ON). |
[Search Attribute] | When performing LDAP search, enter the search attribute to be automatically added before the user name (using up to 64 single-byte characters). The attribute value must start with a single-byte alphabetical character (default: [uid]). |
[Search Directory Service] | If you select [Active Directory], you can limit a search target for authentication to users (default: [Other]). However, when a search target for authentication is limited to users, search target identification processing occurs on the server side, so the authentication time may be delayed. This function is available when the authentication server is set to Active Directory. |
Settings of [Register Simple Authentication Server (2nd Server)]
Setting | Description |
---|---|
[2nd Server Setting] | When using the secondary server, set this option to ON (default: OFF). |
[Round Robin function] | When using the round-robin function, set this option to ON (default: OFF). If you select round-robin function, you can alternately connect the primary and secondary servers to distribute the server load. |
[Reconnection Settings] | Configure a setting to connect to the secondary server when the machine cannot be connected to the primary server (default: [Set Reconnect Interval]). When the round-robin function is enabled, this setting can also be used to connect to the primary server when the machine cannot be connected to the secondary server.
|
Secondary Server Information | Register the secondary server. For details, refer to the registration contents of the primary server. To extract the primary server setting and configure the secondary server setting, click [Retrieve from 1st Server]. |
If SSL is installed in your environment, enable SSL.
Select [User Auth/Account Track] - [Simple Authentication setting] - [Register Simple Authentication Server] - [Edit] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
Setting | Description |
---|---|
[Enable SSL] | When using SSL communications, set this option to ON (default: OFF).
|
[Certificate Verification Level Settings] | To validate the certificate during SSL communication, select items to be verified.
|