IP fax (SIP) is a function that enables the real-time sending/receiving via the intranet and Internet. It is possible to send and receive with less delay compared to Internet fax that spools jobs in the mail server. Also, this function provides a lower communication costs than a fax using a telephone line.
IP fax (SIP) uses the SIP server to call a destination. The SIP server centrally manages the association between the identifiers (SIP-URI) and IP addresses of SIP-compatible devices, and intermediates the establishment of a connection between devices.
For details on settings, refer to the [IP-FAX(T38) Detail Setting] settings (described after this procedure).
For details on settings, refer to the [SIP Basic Setting] settings (described after this procedure).
Settings of [IP-FAX(T38) Detail Setting]
Setting | Description |
---|---|
[Port Number1] | If necessary, change the port number (default: [10000]). Specify the port numbers by the number of available lines. |
[Timeout] | Change the communication timeout period as needed (default: [60] sec.). |
Settings of [SIP Basic Setting]
Setting | Description |
---|---|
[SIP setting] | When [IP-FAX(T38) Function Settings] is set to ON in step 1, this option is set to ON synchronously. |
[User ID] | Enter the SIP user ID of this machine. |
[Domain Name] | Enter the name of the SIP domain which this machine joins. |
[Transport Mode] | Select the transport protocol (default: [UDP]). |
[Port Number] | If necessary, change the port number (default: [5060]). |
[Keep-alive interval value] | Enter the session update interval (default: [1800]). |
[Request retransmission interval value] | Enter the packet resending interval (default: [500]). |
Configure the setting to connect to the SIP server.
Select [Network] - [SIP setting] - [SIP Server Setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the settings. For details, refer to [SIP Server Setting].
Configure the setting to automatically acquire SIP configuration information using DHCP in IPv4 environment.
Select [Network] - [SIP setting] - [SIP Automatic Retrieval Settings(IPv4)] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the settings. For details, refer to [SIP Automatic Retrieval Settings(IPv4)].
Configure the setting to automatically acquire SIP configuration information using DHCP in IPv6 environment.
Select [Network] - [SIP setting] - [SIP Automatic Retrieval Settings(IPv6)] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the settings. For details, refer to [SIP Automatic Retrieval Settings(IPv6)].