Enlarge Display Settings
Changing default settings for Normal Display and Enlarge Display collectively
Configure settings to simultaneously change the default values for Normal screen display and Enlarge display at the same time.
Select [System Settings] - [Reset Settings] - [Job Reset] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the following settings.
Setting | Description |
|---|---|
[Default Basic/Enlarge Display Common Setting] | Select whether to configure the initial values for Normal and Enlarge Display mode at the same time (default: [Do not Apply]). If [Apply to all] is selected, [Default Enlarge Display Settings] is not displayed. Initial values for each mode that are changed in [Default Copy Settings] or [Default Scan/Fax Settings] are applied to both Normal and Enlarge Display modes. |
Setting the action for switching the display to Enlarge Display
Select whether to change the default display of the classic style to the enlarge display mode. Also, set the operation to be taken when the normal screen display is switched to the enlarge display mode.
Select [System Settings] - [Enlarge Display Settings] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and configure the settings. For details, refer to [Enlarge Display Settings].
in the upper-right of a page, it turns into 
and is registered as a bookmark.