Using the TWAIN driver enables you to use this machine as a scanner by controlling it from a computer connected to the network.
When using the TWAIN scan, follow the below procedure to configure the settings.
Configure the settings to use the TWAIN Scan function.
For details on settings, refer to the [SNMP Setting] settings (described after this procedure).
For details on settings, refer to the [TCP Socket Setting] settings (described after this procedure).
Settings of [SNMP Setting]
Setting | Description |
---|---|
[SNMP Setting] | When using the TWAIN scan function, set this option to ON (default: ON). Select the check box of the SNMP version you use. |
[UDP Port Setting] | If necessary, change the UDP port number (default: [161]). |
Settings of [TCP Socket Setting]
Setting | Description |
---|---|
[TCP Socket] | When using the TWAIN scan function, set this option to ON (default: ON). |
[Port No.] | If necessary, change the TCP Socket port number (default: [59158]). |
While the TWAIN scan is running, Control Panel operations are locked. If necessary, change the time period before the control panel is unlocked.
Select [System Settings] - [Network TWAIN] in user mode of Web Connection (or in [Utility] - [Utility] of this machine), and configure the settings. For details, refer to [Network TWAIN].