Using the Memory RX Function
Memory RX is a function to save a received fax in the Memory RX User Box of this machine without printing it. You can check the contents of incoming faxes and print only those you need to print, by which you can reduce the printing cost.
1
Select [Fax Settings] - [Function Setting] - [RX Data Operation Settings] - [Memory RX Setting] in administrator mode of Web Connection (or in [Utility] - [Administrator] of this machine), and click [OK].
2
In [Memory RX Setting], configure the settings for using the Memory RX function.
For details, refer to [Memory RX Setting].
Tips
- The Memory RX function cannot be used together with the following functions.
TSI User Box, PC-Fax RX, Forward TX - When multiple lines are used, you can set this function for each line if [TX/RX Settings] - [Individual Receiving Line Setup] is set to ON.
in the upper-right of a page, it turns into 
and is registered as a bookmark.