Manually enter a destination.
When sending a job to an unregistered destination, set this item.
[Register Name]: Enter the destination name. The registered name is displayed in the destination list. Up to 24 single-byte characters (12 double-byte characters) can be entered.
[Reference Name]: Enter text to search for a destination. Up to 24 single-byte characters (12 double-byte characters) can be entered.
[Host Address]: Enter the address of the WebDAV server. Up to 253 single-byte characters can be entered.
[File Path]: Enter the file path of the WebDAV server. Up to 142 single-byte characters (71 double-byte characters) can be entered.
[Login Name]: Enter the account name of the WebDAV server. Up to 64 single-byte characters (32 double-byte characters) can be entered.
[Password]: Enter the password of the WebDAV server. Up to 32 single-byte characters can be entered. The entered password is shown by "*".
[Port No.]: Enter the port number used for the WebDAV server using a 5-digit number (00001 to 65535).
[Proxy]: Configure a setting to use a proxy server. If the destination is an external server, select [ON]. To use the server, be sure to set [WebDAV Client Settings] to [ON]. For details about [WebDAV Client Settings], refer to [WebDAV Client Settings].
[SSL]: Configure a setting to use SSL. If the destination is an external server, select [ON].
[Domain Name]: Enter the domain name of the WebDAV server. Up to 64 single-byte characters can be entered.
Press [Register] to register a destination. Registering a target destination allows you to select it from the destination list.
Press [Scan Settings] to set scanning conditions. For details, refer to [Scan Settings].