[File Name]

Enter the file name for the scan data to send.

Up to 60 single-byte characters (30 double-byte characters) can be entered.

Tips

• The file name can be omitted. If the file name is not manually assigned, it is automatically created by a combination of the preset string, date, time, and sequential number. To automatically assign the file name, set its string in [Network/Scan Set.]. For details, refer to [File Name].

1

Press [File Name].

2

Enter the desired file name.

• Up to 60 single-byte characters (30 double-byte characters) can be entered.

• For details about how to enter characters, refer to Entering Text.

3

Press [OK].