Manually enter a destination.
When sending a job to an unregistered destination, set this item.
[Register Name]: Enter the destination name. The registered name is displayed in the destination list. Up to 24 single-byte characters (12 double-byte characters) can be entered.
[Reference Name]: Enter text to search for a destination. Up to 24 single-byte characters (12 double-byte characters) can be entered.
[Host Address]: Enter the address of the SMB server. Up to 253 single-byte characters can be entered.
[File Path]: Enter the file path of the SMB server. Up to 255 single-byte characters (127 double-byte characters) can be entered.
[Login Name]: Enter the account name of the SMB server. Up to 32 single-byte characters (16 double-byte characters) can be entered.
[Password]: Enter the password for the SMB server. Up to 32 single-byte characters can be entered. The entered password is shown by "*".
Press [Register] to register a destination. Registering a target destination allows you to select it from the destination list.
[Browsing]: Searches for a destination in the browser list on the network.
Press [Scan Settings] to set scanning conditions. For details, refer to [Scan Settings].