To display this screen, press [SCAN] at the top of the screen.
Select a destination to send scan data to, and proceed to the screen for setting scanning conditions.
The destination can be selected from the list of pre-registered destinations or entered directly.
Multiple destinations can be selected by setting for each sending method ([E-mail], [HDD], or [FTP]).
Screen access
Touch panel - [SCAN]
Setting item | Description |
---|---|
Displays the selected sending destinations. | |
Displays a list of email addresses. | |
Displays a list of HDD destinations. | |
Displays a list of FTP destinations. | |
Displays a list of SMB destinations. | |
Displays a list of WebDAV destinations. | |
Displays a list of Group destinations. | |
Displays the sending destinations in the USB flash drive. | |
Sets the title or text of the email to be sent, as well as the sender address. This function is only displayed when [E-mail] is selected. | |
[Input Address] | Manually enter a destination. When sending a job to an unregistered destination, set this item. The entry items vary depending on the sending method. |
[Search] | Searches for the target destination from the registered destinations. The procedure varies depending on whether [E-mail] or another sending method is selected. For details about the procedure with [E-mail] selected, refer to [Search]. For details about the procedure when a sending method other than [E-mail] is selected, refer to [Search]. |
Displays a list of destinations in the selected group. | |
[A to Z] | Displays a list of destinations for which [Reference Name] is registered with alphabetic characters. |
[Others] | Displays a list of destinations for which [Reference Name] is registered with characters such as symbols other than alphabetic characters. |
[Main] | Displays a list of frequently used destinations that are registered in [Main]. |
[All] | Displays all of the registered destinations. |
[Clear All] | Resets the selected destination. When multiple destinations are selected using certain sending methods, they can be canceled collectively. |
[Register/Edit] | Registers, edits, or deletes a destination. Destinations can also be added. |
Saves the selected destination, and sets scanning conditions. |