Configure any Application setting to scan data.
Pressing All OFF turns all application functions off.
Book Copy
Orig. Bind Direction: Left Bind, Right Bind
Cover Put Select: No Cover, Front With Cover, Front/Back With Cover
In scan mode, Booklet cannot be selected in Additional Function.
NoImageAreaErase
FrameCenterErase
Function Selection: Erase/All Sides, Erase/Each Side, Center Erase
Erase Width Setting
When Erase/All Sides is selected: Specify Top, Bottom, Right, and Left between 1 mm and 300 mm to set all the widths to be erased.
When Erase/Each Side is selected: Specify Top, Bottom, Right, and Left between 1 mm and 300 mm to set each width to be erased.
When Center Erase is selected: Specify the width to be erased between 1 mm and 99 mm.
Full Image Area
Annotation
Annotation Select
Recalls Annotation Setting registered in Utility/Counter - Administrator Setting - System Setting - Annotation Setting.
Temp.No.Set
Press this button to temporarily change Annotation Number that is registered, then enter the changed number.
Print Pos. Setting
Specify the desired annotation printing position.
Fine Adjustment
Fine-adjusts the annotation printing position.
OK
Applies the setting.
Cancel
Cancels the setting.
All OFF
Turns the function of the selected setting off when All OFF is pressed on the individual setting screen.
For details, refer to [Annotation Setting].