Using Web Connection for Setting

  1. Start the Web browser.

  2. Type "http://IP address of image controller>/" in the URL field, and press the Enter key to access Web Connection.

  3. Click the Network tab.

  4. Configure a network setting depending on the transmission method.

    - Scan to E-mail: Refer to Network Setting Using Web Connection.

    - Scan to FTP: Refer to Network Setting Using Web Connection.

    - Scan to SMB: Refer to Network Setting Using Web Connection.

    - Scan to WebDAV: Refer to Network Setting Using Web Connection.

For details about the Web Connection function, refer to Access to Web Connection.