Color Density Control: Basic Setting

You can enables the color density control and set the execution timing, etc.

When using the color density control function (Adjustment of color sensor for each paper type / Color density manual control), always set the Use Color Density Control to ON.

  1. On the touch panel of the main body, press Adjustment on the MACHINE screen.

    The Adjustment Menu is displayed.

  2. Press Quality Adjustment on the Adjustment Menu.

  3. Press Color Density Control.

  4. Press Basic Setting.

  5. Make a setting for each item.

    Make settings according to your environment. The settings in this case are as follows:

    Item

    Description

    Use Color Density Control

    ON

    Periodical Adj. Execution

    ON

    Adjustment Execution Timing

    Before Job Start

    Chart Tray Setting

    OFF

    Switch Color(1st or 2nd)

    Precise

    Adjustment Interval

    OFF

    • supplementary explanationTo automatically perform the density control with the RU option (Relay Unit RU-511), set the Periodical Adj. Execution to ON.