[Device Info / Errors]

Displays system information and error information.

The following information is displayed.

[No Paper]: Replenish paper for the job currently being printed.

[Hold Job Full]: The [Hold] job list is full.

[Waste Toner Full]: The waste toner box is full.

[Punch Dust Full]: The punch-hole scrap box is full.

[Staple Dust Full]: The staple scrap box is full.

[Trim Scrap Full]: The trimming scrap box is full.

[Slitting Scrap Box Full]: The 2-side slitting scrap box is full.

[Staple Empty]: The staple cartridge is empty.

[Life Limit]: There is no glue remaining for the perfect binding. Or, it is time to replace the trimmer receiver.

[HDD Near Full]: There is an insufficient amount of available space on the HDD.

[Toner Near Empty]: There is an insufficient amount of toner remaining in one of the toner cartridges.

[HDD Folder Full]: The HDD folder is full.

[Secure Box Full]: The Secure box is full.

[Controller HDD Near Full]: There is an insufficient amount of available space on the HDD.

[Waste Toner Near Full]: The capacity of the Waste toner box is insufficient.

[Near Life Limit]: The trimmer receiver is about to be replaced.

[TU Card Tray Full]: The Card tray of the trimmer unit is full.

[TU Card Tray Near Full]: The Card tray of the trimmer unit will become full soon.

[Maintenance Required]: The life limit of the consumables has been exceeded.

[Low Power Mode]: This system is in Low power mode.

Tips

• The displayed items vary depending on the optional devices mounted on this system.