The status of this system is displayed by the icon or message at the bottom right of the screen.
The following contents are displayed.
[Ready]: This system is normal.
[Service Call]: A service call has occurred in this system or the Image Controller.
[Cover Open]: One of the doors of this system is open.
[Paper Jam]: A paper jam has occurred in a location other than the ADF. Follow the instructions shown on the Touch panel of this system to clear the paper jam.
[ADF Cover Open]: ADF is opened.
[ADF Jam]: A paper jam has occurred in the ADF.
[Output Tray Full]: One of the output trays is full.
[Toner Empty]: One of the toner cartridges is empty.
[Humidifier Tank Empty]: The humidifier tank is empty.
[Key Counter Unset]: The key counter is not set.
[Low Power Mode]: This system is in Low power mode.
[Shut OFF Mode]: This system is in Shut-Off mode.
[Warming Up]: This system or the perfect binding option is in Warming-Up mode.
[Now Adjusting]: This system is adjusting.
[Out of Range Detected]: An invalid image was detected during automatic inspection.
[Error]: A print job has stopped for some reason.
[Print Paused]: A print job has been temporarily stopped by the user.
[Print Hold by Warning]: A print job has been temporarily stopped for some reason.
[Printing]: A print job is currently being printed.
[Canceling]: A print job is currently being canceled.
: Indicates a warning.
: Indicates an error.