Scan to FTP
It is necessary to build an FTP server.
Step 1
Check and prepare the network.
You should be connected to a general TCP/IP network environment.
There should be an FTP server.
Step 2
Configure the required system settings.
[TCP/IP Settings]
[FTP TX Settings]
Step 3
Scan operation (select a destination and scan the original)
1. Select [FTP] on the [SCAN] screen.
2. Select a destination FTP server (the destination needs to be registered in advance).
3. Set the scanning conditions in [Scan Settings].
4. Load the original and scan.
Step 4
Operations on the receiving end (computer)
Import the data stored on the FTP server.
in the upper-right of a page, it turns into 
and is registered as a bookmark.