Home Settings and AdjustmentsFinisher Adjustment: Adjusting the Finisher

Finisher Adjustment: Adjusting the Finisher

Make adjustments related to the finisher.

This operation is the same as that in [Adjustment] - [Finisher Adjustment], accessing from the [MACHINE] screen.

  1. Follow the procedure on Administrator Setting to display the [Administrator Setting Menu] screen.

  2. Press [System Setting] on the [Administrator Setting Menu] screen, and then press [Expert Adjustment] and [Finisher Adjustment] in sequence.

    The [Finisher Adjustment Menu] screen is displayed.

    • For details about subsequent operations, refer to the following pages.

    Finisher Adjustment (with Finisher FS-532)

    Finisher Adjustment (Z-Folding Unit ZU-608 Mounted)