Home Settings and AdjustmentsACS Adjustment: Adjusting the ACS Detection Function

ACS Adjustment: Adjusting the ACS Detection Function

Adjust the automatic color detection function if a colored original is identified as monochrome or a monochrome original is identified as colored when using this function.

Adjustment Range: -2 to +2

  1. Follow the procedure on User Setting to display the [User Setting Menu] screen.

  2. Press [Image Quality Setting] on the [User Setting Menu] screen, and then press [ACS Adjustment].

  3. Place the original onto the original glass, and press [Scan].

    Scanned result is displayed in the message area.

  4. If colored original is read as monochrome, enter a higher value from the touch panel keypad, then press [Set]. If monochrome original is read as colored, enter a lower value, then press [Set].

  5. Repeat steps 3 and 4 until the desired result is obtained.

  6. Press [Return].

    The screen returns to the [Image Quality Setting Menu] screen.