Copy Setting: Setting the Various Operations When Copying

[Auto Select of Booklet Copy]

Set the machine to automatically select the Booklet mode when Fold & Staple or Multi Half Fold mode is selected.

Auto Select, Manual Select

[Orig. Glass Auto Size Select]

Specify whether or not to activate Auto Paper when an original is placed on the original glass.

ON, OFF

[ADF Auto Size Select]

Specify whether or not to activate Auto Paper when an original is placed on the ADF.

ON, OFF

[Auto Zoom (Original Glass)]

Specify whether or not to activate Auto Zoom when an original is placed on the original glass.

ON, OFF

[Auto Zoom (ADF)]

Specify whether or not to activate Auto Zoom when an original is placed on the ADF.

ON, OFF

[Non-Image Area Erase]

Specify the conditions to be applied to the Non-Image Area Erase function.

[ON]: Always erase the outside area of the original.

[APS/AMS]: Erase the outside area of the original when Auto Paper or Auto Zoom is activated.

[Except Orig. Glass (1:1)]: Erase the outside area except when making a same-sized copy as the original scanned from the original glass.

ON, APS/AMS, Except Orig. Glass (1:1)

[ADF Frame Erase]

Set to erase the frame when copying in ADF mode.

None, 1 mm, 2 mm, 3 mm, 4 mm, 5 mm

[Interruption Suspend Setting]

Specify the timing to interrupt the current job when Interrupt is pressed on the control panel while copying is in progress.

[Stop Immediately]: The machine stops copying immediately to allow an interrupt job.

[When Current Comp.]: The machine completes to output the current set before stopping to allow an interrupt job.

Stop Immediately, WhenCurrentComp.

[Printer Prohibit Timer]

Set the time interval to suspend a print job via PC after the last operation of touch keys.

OFF, 15 seconds, 30 seconds, 60 seconds, 90 seconds

[Orig./Out Bind Direction Set]

Specify whether or not to conform the bind direction in Output Setting with that specified in Original Setting.

ON, OFF

[Specify Default Tray APS OFF]

Specify the tray to be automatically selected when Auto Paper (APS) is canceled.

APS Tray, Tray 1 to Tray 5, Bypass

[Scan Stop by Pull Out Tray]

Specify whether or not to stop the scanning operation if any tray is pulled out.

ON, OFF

[Mode Hold After Scan Upload]

Select whether or not to keep the scan conditions after the scanned data is uploaded.

Keep, Not Keep

[BlankSheetDetectionLevelAdj.]

Adjust the level to detect blank pages when [BlankPage Removal] is enabled.

-2, -1, 0, +1, +2