Home Settings and AdjustmentsNon-image Area Erase: Erasing the Outside of the Original

Non-image Area Erase: Erasing the Outside of the Original

The following three options are provided to select the condition of Non-Image Area Erase function.

  • [Erase Outside of Original]: Always erase the outside area of the original.

  • [ON - APS/AMS Only]: Erase the outside area of the original only when Auto Paper or Auto Zoom is activated.

  • [Except Orig. Glass (1:1)]: Erase the outside area except when making a same-sized copy as the original scanned from the original glass.

  1. Follow the procedure on Administrator Setting to display the [Administrator Setting Menu] screen.

  2. Press [System Setting] on the [Administrator Setting Menu] screen, and then press [Expert Adjustment], [Erase Correction], and [Non-Image Area Erase] in sequence.

    The [Original Scan Area Setting] screen is displayed.

  3. Select the desired setting key.

  4. Press [OK] to complete the setting.

    • To cancel the change, press [Cancel].

    In either case, the screen returns to the [Erase Correction Menu] screen.