Tri-Fold Adjustment
When Finisher FS-612 is mounted on the machine, adjust the first folded position in Tri-Fold mode.
Objects of Adjustment: Offset for All Size, A4 short edge feed, 8.5 11 short edge feed, 16K short edge feed
Press Adjustment on the MACHINE screen to display the Adjustment Menu screen.
Press Finisher Adjustment and Tri-Fold Adjustment in sequence.
Select the size to be adjusted.
Press Print Mode.
Load the paper with the size to be adjusted, then select that tray.
Press Start on the control panel.
A sample pattern will be output.
Adjust the paper folding positions.
Allowance:
Paper Size
a
b
c
A4 short edge feed
95 mm ± 2 mm
101 mm ± 2 mm
101 mm ± 2 mm
8.5 11 short edge feed
89 mm ± 2 mm
95 mm ± 2 mm
95 mm ± 2 mm
16K short edge feed
88 mm ± 2 mm
91 mm ± 2 mm
91 mm ± 2 mm
If any adjustment is required, press Exit PrintMode to return to the Tri-Fold- Adjustment screen.
Use the touch panel keypad to enter the set value.
Adj. Range: -128~+127 1 step = 0.1 mm
[-] To widen [+] To narrow
supplementary explanationUse +/- to specify the value to be positive or negative.
supplementary explanationPress Set to change the Current Value.
Repeat steps 4 to 9 until the desired result is obtained.
Press Return.
The screen returns to the Finisher Adjustment Menu screen.