When importing a job using AccurioPro Hot Folder, Command WorkStation (CWS), etc. to print prints, the target image is not positioned in the center.

Cause

This error occurs because the sizes of the original and the actual printing paper are different.

Option

All controllers

Working time

Fifteen minutes or less

Overview

This error can be resolved by changing the size of the original.

Precautions

It may be necessary to re-create data depending on applications.

Procedure

The following example shows a procedure using Adobe Acrobat.

1. Open the PDF file, and click Print.

2. Select Adobe PDF for printer selection, and open Properties.

3. Select High Quality Print from the Default Settings pull-down menu of the Adobe PDF Settings tab.

4. Select the desired orientation on the Layout tab, and open Advanced.

5. Select PostScript Custom Page Size in Paper Size.

6. Match the Width and Height values of Custom Page Size Dimensions with the actual printing paper size.

7. Return to the Print Setting page, and click Print. A PDF file is re-created with the size specified in step 6.

8. Save and print the re-created file; the image is positioned in the center, enabling this problem to be avoided.