Selecting Finishing

This machine allows selecting from various kinds of finishing types corresponding to a wide range of applications.

This section explains the basic use of this machine with reference to a typical finishing type.

What is 2-Sided Printing?

  • Impose each page of the original and then perform 2-sided print. It allows not only full size print, but also reduced print wherein two pages of the original fit in one paper (2 in 1).

Overview of Book Spread Print

  • Impose each page of the mixed sized original and then finish up with a book spread print.

What is Staple?

  • Impose each page of the original and perform 2-sided print, and then finish up with a staple. It allows not only full size print, but also reduced print wherein two pages of the original fit in one paper (2 in 1).

*Use Finisher FS-532.

What is Booklet Printing?

  • Impose each page of the original and then finish up with the booklet function. It also allows imposition at a reduced size on a paper with the same size as the original.

*Use Saddle Stitcher SD-506.

What is Perfect Binding?

  • Perform perfect binding with blank paper or printed cover paper. The Cover Print 2 in 1 mode allows perfect binding by printing the images of the front cover and back cover.

* Use Perfect Binder PB-503.

What is Folding?

  • After printing, it can be finished with Z-Fold, Tri-Fold-in, or Gate Fold.

*Use Folding Unit FD-503.

Overview of Banner Printing

  • Print on banner paper.

* If Banner Tray Unit MK-740, Output tray reinforcing unit for banner MK-740m (feeding extension tray or output extension tray), Large Capacity Unit LU-202XL, or Large Capacity Unit LU-202XLm is mounted on this machine, you can print on banner paper.