Function Overview
- Function Overview
- Adjustment Menu
  - Adjustment Items
Quality Adjustment
Machine Adjustment
- Printer Adjustment
- Scan Adjustment
Stabilization Adj. Setting
Execute Adjust Operation
Finisher Adjustment
- Staple Finisher(Main) Adj. (Finisher FS-532)
- Staple Finisher(Fold) Adj. (Finisher FS-532)
- Staple Finisher(Punch) Adj. (Finisher FS-532)
- Staple Finisher(PI) Adj. (Finisher FS-532)
  - PI Registration Adjustment
- Staple Finisher(Main) Adj. (Output Tray OT-510)
- Multi Folder(Punch) Adj. (Folding Unit FD-503)
  - Paper Width Adjustment
  - Punch Vertical Position Adj.
- Multi Folder(Fold) Adj. (Folding Unit FD-503)
- Stacker Adjustment (Large Capacity Stacker LS-506)
  - Paper Width Adjustment
  - Paper Length Adjustment
- Saddle Stitcher Adjustment (Saddle Stitcher SD-506)
- Saddle Stitcher Adjustment (Saddle Stitcher SD-513)
- Perfect Binder Adjustment (Perfect Binder PB-503)
- Finisher Adjustment (Finisher FS-531 / Finisher FS-612)
- Relay Stacker Adjustment (Relay Unit RU-510)
  - Paper Width Adjustment
  - Paper Length Adjustment
ADF Adjustment
PFU Air Assist Adjustment
IQ Detected Result
IQ Function Setting
Memory Status
Both Sides Adjust
Adjusting the Finishing
- Image Quality
- Adjusting the Margin between Pages
  - About Book Spread Printing
  - Gutter Adjustment
- Adjusting the Staple Positions
- Adjusting Misalignment or Tilt of the Punch Hole Positions
- Adjusting the Half-Fold Position of a Booklet
- Adjusting Misalignment, Skew, and Protrusion of a Perfect-Bound Book
- Adjusting the Folding Positions

Execute Adjust Operation

Perform adjustment operation for Gamma Automatic Adj., Color Regist. Auto Adj., Toner Refresh Mode, and Belt Refresh Mode.

Button	Function
Gamma Automatic Adj.	Make this adjustment when color reproduction of the whole output is no good.
Color Regist. Auto Adj.	Make this adjustment when a gap occurs in heap of YMCK between original and output on consecutive print.
Toner Refresh Mode	Make this adjustment for following phenomena. Rough image Random small point Small white circle
Belt Refresh Mode	If white lines parallel with the paper feeding direction are detected at the same position in all the YMCK colors, polish the surface of the intermediate transfer belt to improvement it.

Tips

The four adjustment operations above are the same as for the adjustment operation performed by selecting Administrator Setting - System Setting - Expert Adjustment - Execute Adjust Operation from the UTILITY screen.

Press Adjustment on the MACHINE screen to display the Adjustment Menu screen.
Press Execute Adjust Operation.
Select the desired adjustment operation item.
- supplementary explanationMultiple selections are available.
Press OK, and press Exit [Adjustment] on the Adjustment Menu screen. Closing the Adjustment Menu screen starts the target adjustment operation.
- supplementary explanationTo cancel the operation, press Cancel.
The screen returns to the Adjustment Menu screen.