Function Overview
- Function Overview
- Adjustment Menu
  - Adjustment Items
Quality Adjustment
Machine Adjustment
- Printer Adjustment
- Scan Adjustment
Stabilization Adj. Setting
Execute Adjust Operation
Finisher Adjustment
- Staple Finisher(Main) Adj. (Finisher FS-532)
- Staple Finisher(Fold) Adj. (Finisher FS-532)
- Staple Finisher(Punch) Adj. (Finisher FS-532)
- Staple Finisher(PI) Adj. (Finisher FS-532)
  - PI Registration Adjustment
- Staple Finisher(Main) Adj. (Output Tray OT-510)
- Multi Folder(Punch) Adj. (Folding Unit FD-503)
  - Paper Width Adjustment
  - Punch Vertical Position Adj.
- Multi Folder(Fold) Adj. (Folding Unit FD-503)
- Stacker Adjustment (Large Capacity Stacker LS-506)
  - Paper Width Adjustment
  - Paper Length Adjustment
- Saddle Stitcher Adjustment (Saddle Stitcher SD-506)
- Saddle Stitcher Adjustment (Saddle Stitcher SD-513)
- Perfect Binder Adjustment (Perfect Binder PB-503)
- Finisher Adjustment (Finisher FS-531 / Finisher FS-612)
- Relay Stacker Adjustment (Relay Unit RU-510)
  - Paper Width Adjustment
  - Paper Length Adjustment
ADF Adjustment
PFU Air Assist Adjustment
IQ Detected Result
IQ Function Setting
Memory Status
Both Sides Adjust
Adjusting the Finishing
- Image Quality
- Adjusting the Margin between Pages
  - About Book Spread Printing
  - Gutter Adjustment
- Adjusting the Staple Positions
- Adjusting Misalignment or Tilt of the Punch Hole Positions
- Adjusting the Half-Fold Position of a Booklet
- Adjusting Misalignment, Skew, and Protrusion of a Perfect-Bound Book
- Adjusting the Folding Positions

Periodical Both Sides Adj.

Configure settings for the periodical both-side adjustment. This menu item is to be displayed on the machine mounted with Integrated Color Care Unit IQ-501.

Press Adjustment on the MACHINE screen to display the Adjustment Menu screen.
Press Quality Adjustment and Periodical Both Sides Adj. in sequence.

Change the settings as needed.

Menu item	Description	Setting value (: Default)
Periodical Both Sides Auto Adjustment	When data is printed out by the number of sheets specified in Adjustment Interval, you can select whether to periodically output charts and perform both sides adjustment. If ON is selected, you can set Periodical Adjustment to ON or OFF for each tray in the AutoMeasure tab of the Both Sides Adjust screen.	ON, OFF
Adjustment Interval	Specify the interval to automatically make the both-side adjustment.	If ON is selected for Period. Both Sides Auto Adj., you can press Change and specify 100 to 9999 sheets. (Default: 500 sheets)
Deviation Check	Select whether to check a deviation.	ON, OFF If ON is selected, specify the defined value (deviation amount) required to judge that a deviation occurs. The defined value between 0.5 mm and 10.0 mm can be specified. (Default: 2.0 mm)

Menu item

Description

Setting value (: Default)

Periodical Both Sides Auto Adjustment

When data is printed out by the number of sheets specified in Adjustment Interval, you can select whether to periodically output charts and perform both sides adjustment.

If ON is selected, you can set Periodical Adjustment to ON or OFF for each tray in the AutoMeasure tab of the Both Sides Adjust screen.

ON, OFF

Adjustment Interval

Specify the interval to automatically make the both-side adjustment.

If ON is selected for Period. Both Sides Auto Adj., you can press Change and specify 100 to 9999 sheets. (Default: 500 sheets)

Deviation Check

Select whether to check a deviation.

ON, OFF

If ON is selected, specify the defined value (deviation amount) required to judge that a deviation occurs. The defined value between 0.5 mm and 10.0 mm can be specified. (Default: 2.0 mm)

Press OK.
The screen returns to the Quality Adjustment Menu screen.